Dear Friends,
Today i got my new retail TViP 605 box. After unpacking i started to pull in all cables.
Trying to start the box i noticed flashing lights Red (Power) and Green (Set). The Controller seems to work since the red lamp seems to react on finger pressings.
Unfortuently i can not get in touch with the TV since the HDMI reaction dosnt seems to be there. I have tried on two different TVs and 2 different HDMI cables just to see if the problem could be TV/cable, but the issue is the same.
I have tried the reset button but nothing happenes. I have also tried factory reset (s-info 4 9 s-info ok) but it was also NO GO.
I have been using alot of MAG boxes before so i am familiar with them but this seems to be very weird behavior to be a new box.
Anyone might have any suggestions or might know if this is kinda normal? The reseller company is valid so i doubt its fake but who knows?
Before i contact them for warranty issue i am giving a try here with you guys to see if there might be some easy quickfix for this. Might just be a bug? Or me missing something once installing...
TViP 605 flashing lights on new box
Re: TViP 605 flashing lights on new box
Update:
After testning with 3 different HDMi cables and 3 different TVs i made a last test which turned out to solve the problem.
I borrowed another Power Supply adapter from a friend and it solved the problem. So my conclusion is that i probably got a Monday example of a PS for my TViP box.
Now everything works as it should and there is no flashing/blinking lamps.
After testning with 3 different HDMi cables and 3 different TVs i made a last test which turned out to solve the problem.
I borrowed another Power Supply adapter from a friend and it solved the problem. So my conclusion is that i probably got a Monday example of a PS for my TViP box.
Now everything works as it should and there is no flashing/blinking lamps.